RAID controller cache: write-back vs write-through and why cache backup matters
How write-back, write-through and read-ahead policies work on Dell PERC and HPE controllers, and what happens when the battery or energy pack fails.
Country
Get in Touch
How write-back, write-through and read-ahead policies work on Dell PERC and HPE controllers, and what happens when the battery or energy pack fails.
كيف تعمل سياسات Write-Back وWrite-Through وRead-Ahead في متحكمات Dell PERC وHPE، وماذا يحدث عند تعطل البطارية أو حزمة الطاقة.
What a SMART predictive failure alert means on Dell PERC and HPE arrays, how to confirm it, and how to replace the drive without losing redundancy.
ماذا يعني تنبيه العطل المتوقع عبر SMART على مصفوفات Dell PERC وHPE، وكيف تتأكد منه، وكيف تستبدل القرص دون فقدان التكرار.
What degraded, offline and failed mean on PERC and HPE arrays, what to do first, and which recovery steps are safe before you call the vendor.
ماذا تعني حالات Degraded وOffline وFailed على مصفوفات PERC وHPE، وما الذي تفعله أولًا، وأي خطوات استعادة آمنة قبل الاتصال بالشركة المصنّعة.
What to check when a PowerEdge or ProLiant stops booting after a drive was replaced, added or moved, without losing the data on the array.
ما الذي يجب فحصه عندما يتوقف خادم PowerEdge أو ProLiant عن الإقلاع بعد استبدال قرص أو إضافته أو نقله، دون خسارة بيانات المصفوفة.
What strip and stripe size mean on Dell PERC and HPE controllers, which sizes each controller offers, how to pick one and how changes are made.
معنى حجم الشريحة والشريط في متحكمات Dell PERC وHPE، والأحجام التي يدعمها كل متحكم، وكيف تختار الحجم، وكيف يتم تغييره.
Translate RAID terms and tools between Dell PERC, HPE Smart Array (SR) and HPE MR controllers: spares, foreign drives, cache, background checks and CLIs.
ترجمة مصطلحات RAID وأدواتها بين Dell PERC وHPE Smart Array (SR) وHPE MR: الأقراص الاحتياطية والأقراص الأجنبية والذاكرة المؤقتة والفحوص وسطر الأوامر.
Mixing rules, cache and strip settings for SSD arrays, SSD wear monitoring in iDRAC and HPE SSA, and rebuild points for SSD and HDD RAID.
قواعد الخلط، وإعدادات الذاكرة وحجم الشريحة لمصفوفات SSD، ومراقبة تآكل SSD في iDRAC وHPE SSA، ونقاط إعادة البناء لمصفوفات SSD وHDD.
Which Dell PERC and HPE Smart Array/MR controllers support SAS, SATA and NVMe drives, the speeds they list, and the rules for mixing drives in arrays.
أي متحكمات Dell PERC وHPE Smart Array وMR تدعم أقراص SAS وSATA وNVMe، والسرعات المذكورة، وقواعد خلط الأقراص في المصفوفات.
How RAID 0, 1, 5, 6, 10, 50 and 60 work, how many drives each needs, what failures they survive and how to work out usable capacity.
كيف تعمل مستويات RAID 0 و1 و5 و6 و10 و50 و60، وكم قرصًا يحتاج كل مستوى، وكم عطلًا يتحمل، وكيف تحسب السعة القابلة للاستخدام.
What happens while a RAID array rebuilds, which factors set the rebuild time on Dell PERC and HPE controllers, and how to lower the risk of data loss.
ماذا يحدث أثناء إعادة بناء مصفوفة RAID، وما العوامل التي تحدد مدتها في متحكمات Dell PERC وHPE، وكيف تقلل خطر فقدان البيانات.